What is the cause of voids in plastic injection molded parts?

Sep 11, 2026Leave a message

Voids in plastic injection molded parts can be a real headache for manufacturers like us. As a Plastic Injection Molding supplier, we've dealt with this issue more times than we'd like to admit. But through years of experience, we've identified several key causes of voids in plastic injection molded parts. Let's take a deep dive into what might be going wrong and how you can fix it.

1. Insufficient Packing Pressure

One of the most common causes of voids is insufficient packing pressure. During the injection molding process, the molten plastic is injected into the mold cavity. Once the cavity is filled, additional pressure, known as packing pressure, is applied to compensate for the shrinkage that occurs as the plastic cools. If the packing pressure is too low, there won't be enough plastic to fill the space left by the shrinking material, leading to voids.

Think of it like filling a balloon. If you stop filling it before it's fully stretched, there will be empty spaces inside. Similarly, in injection molding, if the packing pressure doesn't force enough plastic into the mold, voids will form. We often see this issue when working on complex parts with thin walls or intricate designs, such as the Plastic Egg Tray Mold. These parts require precise packing pressure to ensure complete filling.

2. Improper Gate Design

The gate is the entry point for the molten plastic into the mold cavity. If the gate is too small, it can restrict the flow of plastic, causing it to cool too quickly and form voids. On the other hand, if the gate is too large, it can lead to over - packing in some areas and under - packing in others.

For example, when we manufacture the Hot Sell Motorcycle Cover Radiator Injection Mould, the gate design is crucial. A well - designed gate allows the plastic to flow smoothly and evenly throughout the mold cavity, reducing the risk of voids. Poor gate design can result in uneven filling and, ultimately, the formation of voids.

3. High Melt Temperature

Another factor that can contribute to voids is a high melt temperature. When the plastic is heated to a very high temperature, it becomes more viscous and prone to gas formation. As the plastic cools and solidifies, these gases can get trapped inside the part, creating voids.

We've found that when working on parts like the Plastic Wider Book Bin Moud, maintaining the right melt temperature is essential. If the temperature is too high, not only do we risk voids, but the quality of the part can also be compromised, with issues like discoloration and reduced mechanical strength.

4. Rapid Cooling

Rapid cooling of the plastic in the mold can also lead to voids. When the outer layer of the plastic solidifies too quickly, it forms a shell that restricts the flow of the still - molten plastic inside. As the inner plastic continues to shrink, voids are created.

This is particularly relevant when we're dealing with thick - walled parts, such as those made using the Plastic Injection Helmet Mould. A slow and controlled cooling process is necessary to allow the plastic to shrink evenly and prevent the formation of voids.

5. Moisture in the Plastic Resin

Moisture in the plastic resin can cause significant problems during the injection molding process. When the resin is heated, the moisture turns into steam, which can get trapped in the plastic and form voids.

We always make sure to properly dry the plastic resin before using it in our injection molding machines. This is especially important for hygroscopic plastics, which absorb moisture from the environment easily. For example, when manufacturing parts with the Plastic Motorcycle Cover Injection Mould, we take extra care to ensure the resin is dry to avoid voids caused by moisture.

How to Solve the Void Problem

Now that we've identified the causes, let's talk about how to solve them. First, make sure to adjust the packing pressure according to the part design. Conducting trial runs and making small adjustments can help you find the optimal packing pressure.

Second, review and optimize the gate design. You may need to consult with an experienced mold designer to ensure the gate is of the right size and in the right location for proper plastic flow.

Third, monitor and control the melt temperature. Use temperature sensors and follow the manufacturer's recommendations for the plastic resin you're using.

plastic injection moldingPlastic Wider Book Bin Moud

Fourth, implement a controlled cooling system. This can involve adjusting the cooling water temperature and flow rate in the mold to ensure a slow and even cooling process.

Finally, always dry the plastic resin thoroughly before use. Invest in a good drying unit and follow a strict drying schedule.

Conclusion

Voids in plastic injection molded parts can be caused by a variety of factors, including insufficient packing pressure, improper gate design, high melt temperature, rapid cooling, and moisture in the plastic resin. As a Plastic Injection Molding supplier, we're constantly working to improve our processes and eliminate these issues.

If you're facing problems with voids in your plastic injection molded parts or are interested in our products like the ones mentioned above, we're here to help. We have the expertise and experience to provide you with high - quality injection molding solutions. Reach out to us to discuss your requirements and let's work together to create the perfect plastic parts for your needs.

References

  • "Injection Molding Handbook" by Oskiuta and Mitrovic
  • "Plastic Injection Molding: Principles and Practice" by Rosato, Rosato, and Schindler
  • Various industry whitepapers on plastic injection molding quality control