The Selection Of Hot Runner For Molds

Sep 30, 2025 Leave a message

The selection of hot runners for molds needs to comprehensively consider multiple factors. The following are some key points:

Production batch: Hot runner molds have a higher cost. For large-scale production (such as an annual output of more than 500,000 pieces), their advantages of no runner waste, material savings, and improved production efficiency can significantly reduce long-term costs, so they are more cost-effective. However, for small-batch production or situations with frequent switching of multiple varieties, cold runner molds are more suitable due to their simple structure and low cost.

Material properties: For heat-sensitive materials, such as PVC and POM, cold runners are a better choice to avoid material decomposition in the hot runner due to long-term heating. But for high-viscosity materials, such as PC and PA+GF, hot runners can reduce the injection pressure and ensure the smooth flow of the melt, which is more conducive to molding.

Product structure: Thin-walled parts (thickness less than 1mm) have high requirements for filling pressure. Hot runners can ensure that the melt fills the cavity with a stable pressure and temperature, reducing defects such as insufficient filling or warping. For multi-cavity molds (such as more than 32 cavities), using hot runners can better balance the fluidity of each cavity and ensure the consistency of the product.

Appearance requirements: For products with high transparency and high 光洁度,such as optical lenses and mobile phone casings, hot runners can avoid gate marks and improve the appearance quality of the product. For ordinary products with low appearance requirements, the of cold runners can meet the requirements and reduce costs.

Cost budget: The initial cost of hot runner molds is 50%-200% higher than that of cold runner molds, and the maintenance cost is also relatively high, requiring regular replacement of heating elements, etc. If the cost budget is limited and the product has no particularly high requirements for material waste and production efficiency, cold runner molds may be a more economical choice.