How to judge the quality of Plastic Commodity Mould?
Dimensional accuracy: Injection mold processing accuracy is very important. Excessive dimensional deviation will lead to unqualified product quality. Therefore, the quality of the mold can be judged by checking the dimensional accuracy of the mold processing. However, it should be noted that it is not only about the static accuracy but also about its working accuracy to see whether the accuracy is within the reference data range when it is working.
Surface quality: The surface quality of the mold directly affects the appearance and surface quality of the product. Generally speaking, injection molds will undergo polishing, grinding, and other processing after manufacturing to ensure surface smoothness. The quality of the mold can be judged by observing whether the mold surface is smooth and whether there are scratches, bubbles, impurities, and other defects.
Mold material: The material of the mold is also one of the key factors affecting the quality of the mold. High-quality mold materials have high strength, high hardness, and good wear resistance, which can ensure the service life and production efficiency of the mold. The temperature during the production process of injection molded products is generally high, and the size of mold steel that has been tempered at high temperatures will not be affected even in high-temperature environments, thus ensuring production accuracy. At the same time, during the injection molding production process, plastic product raw materials and various additives will corrode the surface of the injection mold and affect the overall accuracy of the injection mold. Therefore, the mold steel must be corrosion-resistant steel. In addition, the high-speed flow of plastic raw materials will cause great friction on the entire mold surface. Therefore, it is necessary to choose wear-resistant and highly rigid mold steel to avoid deformation of the mold during the working process.
Injection molding product quality: Injection molding quality.

